Clear Vibrations

Quakertown, PA's Mobile Enhancement Headquarters

550 California Road Suite 7
Quakertown, PA 18951
267-227-3875
  • Home
  • Services
    • Car Audio
    • Custom Installation
    • Driver Safety
    • Fleet Services
    • Remote Car Starters
  • About Us
    • Work for Clear Vibrations
  • Reviews
  • Locations
  • Contact Us
  • Facebook
  • Instagram
  • Twitter
  • YouTube
You are here: Home / ARTICLES / Why Do Some Car Stereo Upgrades Need Load Resistors?

Why Do Some Car Stereo Upgrades Need Load Resistors?

Load Resistors

If you’ve asked your local specialty mobile enhancement retailer about upgrading your car stereo in recent years, they may have told you that they will need to add load resistors. While seemingly new in concept, the purpose of these resistors is simple. They’re often needed to ensure that the factory-installed amplifier in your car, truck or SUV continues to function the way it was designed.

Modern Car Audio Systems and Class-D Amplifiers

Most modern car audio amplifiers, especially those installed by a vehicle manufacturer on an assembly line, use Class-D output circuitry to provide a balance of sound quality and amplifier efficiency. Automakers are fanatical about reducing fuel consumption. If an electronics supplier can deliver an amplifier that draws less current, there’s less load on the alternator, and the engine has to do less work.

All Class-D amplifiers use a filter circuit on the switching devices’ output to remove high-frequency noise caused by the MOSFETs switching off and on. The output of the filter is the original audio signal. These filters typically comprise a capacitor and an inductor. The value of these components is based on the load (speaker) impedance the amplifier is designed to drive. If the values are incorrect, high-frequency audio information may be attenuated, or too much noise might be allowed into the output.

Load Resistors
Amplifiers like this AudioControl D-4.800 use high-quality capacitors and shielded inductors in their Class-D output filter networks.

Upgrading a Mobile Audio System

If you visit a local stereo shop and tell them you want to upgrade your audio system, they’ll likely suggest new speakers and an amplifier. In many cases, the shop will use the factory amplifier’s output to feed to the new amp. All good so far.

Load Resistors
Frequency response of a good-quality Class-D amplifier when connected to a 4-ohm load.

When the speaker is disconnected from the factory-installed Class-D amplifier, the filter circuit that was designed for a 2- or 4-ohm load isn’t going to function correctly. The signal presented to the capacitor and inductor will cause an oscillation, and a great deal of high-frequency noise may be added to the signal.

Load Resistors
Frequency response of the same amplifier when no load is connected to the output.

Another issue is that these oscillations in the output filter network may become quite significant in terms of their voltage. These voltages can damage components in the amplifier. Companies like Dodge, Chrysler and Ram have circuitry in their radios and amplifiers that prevents them from producing any output if their original speaker isn’t connected.

Load Resistors
AudioControl offers several different load generating devices to allow installers to upgrade factory audio systems without running into noise issues.
Load Resistors
All Wavtech line output converters like this Link DQ have 180-ohm resistors on the inputs. If your application needs require a lower impedance, their linkLD modules can be added to present a 36-ohm load to the factory amplifier.
Load Resistors
The Universal Speakers Simulator (USS4) from Audison presents a low impedance to a factory amplifier so that it will function properly. The USS4 can also generate a remote turn-on output signal to activate an aftermarket amplifier.
Load Resistors
Match amplifiers include a high-level input circuit called ADEP.3 that’s designed to prevent the no-output condition common to factory-installed amplifiers when they don’t see speakers connected.

Upgrade Your Car Stereo Today for Better Sound!

If you can’t turn the volume on your factory-installed car stereo system up without the system distorting, drop by a local car stereo retailer and ask about upgrading your audio system with new speakers and a more powerful amplifier. If they mention that the upgrade will require load-resistors to prevent noise or hiss, now you know why.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Share this:

  • Click to email a link to a friend (Opens in new window)
  • Click to share on Facebook (Opens in new window)
  • Click to share on Twitter (Opens in new window)
  • Click to share on Pinterest (Opens in new window)

Related

Filed Under: ARTICLES, Car Audio, RESOURCE LIBRARY, Uncategorized

About BestCarAudio.com

BestCarAudio.com is a showcase for the very best mobile electronics retailers in the world and a place to educate and inform interested consumers about existing and emerging technologies.

Recent Articles

Does the Power Your Car Audio Amplifier Produces Really Matter

Does the Power Your Car Audio Amplifier Produces Really Matter?

January 29, 2023 

Did you know that a difference of 20 watts of power between one car audio amplifier and another might be completely inaudible? That same 20-watt difference might mean having to … [Read More...]

Your Installer Cant Tune Out Distortion with a DSP

Your Installer Can’t Tune Out Distortion with a DSP

January 22, 2023 

No matter how hard he or she tries, the installer who’s calibrating your car audio system can’t use a digital signal processor to tune distortion out of your system. We aren’t … [Read More...]

Car Audio Amplifier Remote Level and Bass Boost Controls

Car Audio Amplifier Remote Level and Bass Boost Controls

January 15, 2023 

Look at any of the top car audio subwoofer amplifier models available from specialty retailers. You’ll find that most include an option for a remote level control or bass boost … [Read More...]

Upgrades for Your Chevrolet Suburban Tahoe and GMC Yukon

Upgrades for Your Chevrolet Suburban, Tahoe and GMC Yukon

January 8, 2023 

As some of the largest people-movers on the road, the GMC Yukon and the Chevrolet Suburban and Tahoe can benefit from the countless upgrades that are available for them. Whether … [Read More...]

Saying ‘Gains Set Halfway Is Concerning to Car Audio Professionals

Saying ‘Gains Set Halfway’ Is Concerning to Car Audio Professionals

January 1, 2023 

If you’ve browsed amateur car audio groups on Facebook, you’ve likely seen someone post that they have “set the gains halfway” on their amplifier. Their misguided theory is that … [Read More...]

Customer Reviews

Subscribe to Our Website

Enter your email address to subscribe to our website and receive notifications of new posts by email.

Quakertown Showroom and Installation Facility


Get Directions to Clear Vibrations

Hours

Monday9:00 AM - 6:00 PM
Tuesday9:00 AM - 6:00 PM
Wednesday9:00 AM - 6:00 PM
Thursday9:00 AM - 6:00 PM
Friday9:00 AM - 6:00 PM
SaturdayClosed
SundayClosed

Services

  • Car Audio
  • Custom Installation
  • Fleet Services
  • Driver Safety
  • Remote Car Starters

Connect With Us

  • Facebook
  • Instagram
  • Twitter
  • YouTube

Copyright © 2023 Clear Vibrations · Privacy Policy · Website by 1sixty8 media, inc. · Log in

 

Loading Comments...